Page 88
GX2200E
9 GENERAL SETUP
The optional
CMP30
(
RAM3
) Remote Station Microphone can also
change the setup menu using the following procedure.
9.1 DISPLAY
The
GX2200E
can select additional screens other than the default normal
(radio) display.
Refer to section “
7.5 DISPLAY TYPE
” for details.
9.2 LOCAL DISTANCE RECEIVER ATTENUATOR
In some areas, signals from external sources may cause interference to
receiving marine transmissions. The
GX2200E
has two selections, “Distance”
- used to receive weak signals (default), and “Local” - which attenuates
strong signals that may be interfering with reception.
1. Press and hold the
CALL
MENU
key until “
Setup Menu
”
appears.
*HQHUDO6HWXS0HQX
'LPPHU
&RQWUDVW
8QLWRI0HDVXUH
10($'DWD,Q2XW
'LVSOD\
6(16,7,9,7<
48,7
6(/(&7
37+6
'06
5GPUKVKXKV[
&+56#0%'
.QECN
6HWXS 0HQX
&+ )XQFWLRQ 6HWXS
'6& 6HWXS
$,6&RPSDVV6HWXS
*366HWXS
:D\SRLQW 6HWXS
*(1(5$/ 6(783
48,7
6(/(&7
2. Rotate the
CH
knob to select “
GENERAL SETUP
”
menu.
3. Press the
soft key, then select “
SENSI-
TIVITY
” with the
CH
knob.
4. Press the
soft key.
5. Rotate the
CH
knob to select “
LOCAL
”. The receiv-
er sensitivity is now reduced.
6. Press the
soft key to store the selected
level.
7. Press the
soft key two times to return to
radio operation.
To return to normal sensitivity, repeat the above procedure, rotating the
CH
knob to select “
DISTANCE
” in step 5 above.
NOTE
In most cases, “Distance” should be used. If “Local” is selected,
remember the setting should be changed to “Distance” when navi-
gating away from land to receive weak signals.
