Standard Horizon HX400 Owner'S Manual Download

Page: 15 / 48

Page 15

HX400

4.3.3 BATTERY CHARGING

1. Turn the transceiver off.
2. Insert the DC plug from the

PA-45B

into

the DC jack on the

CD-50

side panel,

then plug the

PA-45B

into the AC line

outlet.

3. Insert the

HX400

(with the battery pack)

into the

CD-50

; the antenna should be

at the left side when viewing the charger
from the front.

4. If the

HX400

is inserted correctly, the Red

“

CHARGING

” indicator will glow. A fully-

discharged pack will be charged com-
pletely in approximately 3 hours.

5. When charging is completed, the red

LED indicator will change to green. Re-
move the transceiver from the

CD-50

and unplug the

PA-45B

from the AC line outlet.

CAUTION

The

CD-50

cradle is NOT designed to be waterproof. Do not attempt to

charge in water hazardous locations.

NOTE

The

CD-50

cradle is only designed for the charging of the

HX400

’s bat-

tery, and is not suitable for other purposes. The

CD-50

may contribute

noise to TV and radio reception in the immediate vicinity, so we do not
recommend its use adjacent to such device.

PA-45B

CD-50

Summary of Contents for HX400

















































Search results

Summary of Contents for HX400

Reviews:

Related manuals for HX400

Brands by name

Popular brands

Standard Horizon HX400, Owner'S Manual

Search results

Summary of Contents for HX400

Reviews:

Related manuals for HX400

Brands by name

Popular brands