Standard Horizon ECLIPSE DSC+ GX1200E Owner'S Manual Download Page 85

Page: 85 / 100

Page 85

GX1200E

10.3.9 No Action during Menu Operation

If a key is not pressed during the setup menu or the DSC menu mode, the

GX1200E

will automatically return to radio operation.

This menu selection allows the automatic switching time to be changed. The

default selection is 10 minutes.

1. Press and hold the

key until “

S E T U P

” appears.

-DSC SETUP-

DSC BEEP

AUTO CH SW

NO ACT-MENU

-SETUP MENU-

GENERAL SETUP

CH FUNC SETUP

DSC SETUP

-NO ACT-MENU-

4 MIN

5 MIN

10 MIN

2. Press the

key to select “

DSC SETUP

”

menu.

3. Press the

soft key, then select “

ACT-MENU

” with the

key.

4. Press the

soft key, then press the

key to the desired time and press the

soft key.

5. To exit this menu and return to radio operation

mode press the

key or press the

soft key twice.

10.3.10 No Action during DSC Operation

If a key is not pressed during the DSC operation, the

GX1200E

will automati-

cally return to radio operation.

This menu selection allows the automatic switching time to be changed. The

default selection is 15 minutes.

1. Press and hold the

key until “

S E T U P

” appears.

-DSC SETUP-

AUTO CH SW

NO ACT-MENU

NO ACT-DSC

-SETUP MENU-

GENERAL SETUP

CH FUNC SETUP

DSC SETUP

-NO ACT-DSC-

5 MIN

10 MIN

15 MIN

2. Press the

key to select “

DSC SETUP

”

menu.

3. Press the

soft key, then select “

ACT-DSC

” with the

key.

4. Press the

soft key, then press the

key to the desired time and press the

soft key.

5. To exit this menu and return to radio operation

mode press the

key or press the

soft key twice.

Summary of Contents for ECLIPSE DSC+ GX1200E





































































































Search results

Summary of Contents for ECLIPSE DSC+ GX1200E

Reviews:

Related manuals for ECLIPSE DSC+ GX1200E

Brands by name

Popular brands

Standard Horizon ECLIPSE DSC+ GX1200E, Owner'S Manual

Search results

Summary of Contents for ECLIPSE DSC+ GX1200E

Reviews:

Related manuals for ECLIPSE DSC+ GX1200E

Brands by name

Popular brands