Standard Horizon ECLIPSE DSC+ GX1200E Owner'S Manual Download Page 70

Page: 70 / 100

GX1200E

Page 70

9.12 DSC LOG OPERATION

The

GX1200E

logs transmitted DSC calls, received distress calls, and other

calls (individual, group, all ships, etc.). The DSC log feature is similar to an
answer machine where calls are recorded for review and a “ ” icon will
appear on the radio's display. The

GX1200E

can store up to the latest 20

transmitted calls, up to the latest 20 distress calls, and up to the latest 38

other calls.

NOTE

9.12.1 Reviewing and Resending a Logged Transmitted Call

The

GX1200E

radios allows logged transmitted calls to be reviewed and

resend the call.

1. Press the

key. The “

DSC MENU

” will

appear.

-DSC MENU-

INDIVIDUAL

GROUP

ALL SHIPS

-TRANS. LOG-

YAESU

STANDARD

123456789

-DSC MENU-

POS REQUEST

POS REPORT

DSC LOG

-DSC LOG MENU-

TRANSMITTED

DISTRESS

OTHER CALL

-TRANS. LOG-

INDIVIDUAL

123456789

--/--

2. Press the

key to select “

DSC

LOG

” menu.

3. Press the

soft key, then press

the

key to select “

TRANSMIT-

TED

”.

4. Press the

soft key, then press

the

key to select the station

(name or MMSI number) you want to

review and/or resend the call.

5. Press the

soft key, to review

details for the selected station.

6. Press the

soft key to resend the

call or press the

soft key to go

back to the DSC transmitted call list.

When the “

DSC LOG

” menu is selected, the

GX1200E

may display

high-priority logged call automatically.

Summary of Contents for ECLIPSE DSC+ GX1200E





































































































Search results

Summary of Contents for ECLIPSE DSC+ GX1200E

Reviews:

Related manuals for ECLIPSE DSC+ GX1200E

Brands by name

Popular brands

Standard Horizon ECLIPSE DSC+ GX1200E, Owner'S Manual

Search results

Summary of Contents for ECLIPSE DSC+ GX1200E

Reviews:

Related manuals for ECLIPSE DSC+ GX1200E

Brands by name

Popular brands