Standard Horizon ECLIPSE DSC+ GX1200E Owner'S Manual Download Page 53

Page: 53 / 100

Page 53

GX1200E

11. Press the

soft key to return to

radio operation mode.

-GROUP-

023456789

ROUTINE

CH: 06 0:01

12. Listen to the channel to make sure it

is not busy, then key the microphone

and call the other vessels you desire to

communicate with.

9.6.3 Receiving a Group Call

1. When a group call is received, the

GX1200E

will produce a ringing alarm sound. (DSC

BEEP needs to be enabled to hear alarm.)

The display will show the MMSI (or name) of

the vessel transmitting the group call.

RX GROUP

023456789

SINCE 0:01

ROUTINE

2. Press any key to stop the alarm.
3. To show the nature of the call of the vessel, press the

key.

4. If a key is not pressed for thirty seconds after a group call is received,

the

GX1200E

will automatically switch to the requested channel for you

to monitor communications.

5. To immediately switch to requested channel, press the

soft key.

6. Press the

soft key to suspend the

acknowledgement.

Press the

soft key to resume the

acknowledgement.

GROUP

PAUSING!

7. If you want the radio to stay on the channel

you were on before receiving the group call,

press the

soft key.

RX GROUP

023456789

SINCE 0:01

ROUTINE

8. Press the

soft key to display the operating channel number of

the requested channel.

9. Monitor the channel for the person calling the group for a message.

10. If you want to respond, monitor the channel to make sure it is clear, then

press the

PTT

on the microphone and talk to the calling ship(s).

NOTE



When there is an unread group call, the “ ” icon will appear on

the display. You may review the unread group call from the DSC

log, refer to section

“9.12.3 Reviewing a Logged Other Calls

.”



After a group call is received, the time the call was made and the

ships MMSI or vessels name will appear on the LCD.

Summary of Contents for ECLIPSE DSC+ GX1200E





































































































Search results

Summary of Contents for ECLIPSE DSC+ GX1200E

Reviews:

Related manuals for ECLIPSE DSC+ GX1200E

Brands by name

Popular brands

Standard Horizon ECLIPSE DSC+ GX1200E, Owner'S Manual

Search results

Summary of Contents for ECLIPSE DSC+ GX1200E

Reviews:

Related manuals for ECLIPSE DSC+ GX1200E

Brands by name

Popular brands