Standard Horizon ECLIPSE DSC+ GX1200E Owner'S Manual Download Page 30

Page: 30 / 100

GX1200E

Page 30

8.7.1 Preset Channel Programming

1. Press the

key to select the channel

to be programmed.

2. Press one of the soft keys, then press and

hold the

PRESET

soft key until the channel

number blinks.

3. Press the

key to select the desired

preset channel position (“

P0:

” to “

P9:

”) you

wish to program.

4. Press the

soft key to program the

channel into the preset channel.

5. Repeat steps 1 through 4 to program the

desired channels into the preset channels “

”

~ “

”.

8.7.2 Operation

1. Press one of the soft keys, then press the

PRESET

soft key to recall the preset channel.

The “

PSET

” icon will appear on the display.

2. Press the

key to select the desired

preset channel (“

” to “

”). The preset channel

number appears (“

” to “

”) while selecting

the preset channel.

3. Press one of the soft keys, then press the

PRESET

soft key again to return to the last

selected channel. The “

PSET

” icon will disap-

pear from the display.

Summary of Contents for ECLIPSE DSC+ GX1200E





































































































Search results

Summary of Contents for ECLIPSE DSC+ GX1200E

Reviews:

Related manuals for ECLIPSE DSC+ GX1200E

Brands by name

Popular brands

Standard Horizon ECLIPSE DSC+ GX1200E, Owner'S Manual

Search results

Summary of Contents for ECLIPSE DSC+ GX1200E

Reviews:

Related manuals for ECLIPSE DSC+ GX1200E

Brands by name

Popular brands