Stamina Orbital Rower 1215, Owner'S Manual

Page: 12 / 22

12
FUNCTION BUTTON:
Press the button to select functions. Reset all functions to zero
by pressing the button and holding it down for four seconds.
FUNCTION MARKS ( On The Display ) :
POWER OFF :
POWER ON : Seat movement or push the BUTTON.
Automatic shut off after 4 minutes of inactivity.
Scan
Speed
Distance
Timer A :
S :
D :
T :
Count
Calories
Mile
Signal Mark CO :
CA :
M :
:
SCAN:
SPEED:
DISTANCE:
TIMER:
COUNT:
CALORIES:
Press the button until "A" appears in the display. Automatically scans SPEED, DISTANCE,
TIMER, COUNT, and CALORIES in sequence with change every 4 seconds.
Press the button until "S" appears to display the current speed, from zero to 71 MPH.
Press the button until "D" appears to display the distance you have traveled, from zero to
999.9 miles.
Press the button until "T" appears to display the rowing time, from one second up to 99:59
minutes.
Press the button until "CO" appears to display the total number of rows you have taken,
from zero to 9999 rows.
Press the button until "CA" appears to display the calorie consumption, from zero to 999.9
K cal.
The calorie readout is an estimate for an average user. It should be used only as a comparison
between workouts on this unit.
FUNCTIONS:
HOW TO INSTALL AND REPLACE BATTERY:
Use hand or simple tool to pry the METER(30) from the CONSOLE
(31).
The meter operates with an AA battery. Refer to the illustration to
install or replace the battery.
1.
2.
Rechargeable batteries are not recommended. 1.
NOTE:
AA Battery
USING THE METER
OPERATIONAL INSTRUCTIONS