ASSEMBLY INSTRUCTIONS
9
STEP 5
Attach the
LEFT HANDLEBAR(8)
to the bracket located on the rear of the
LEFT BASE FRAME(2)
with
HEX BOLT(M8x1.25x55mm)(45), WASHER(M8)(57),
and
NYLOCK NUT(M8x1.25)(51).
STEP 6
Attach the
SHOCK(14)
to the bracket located on the front of the
LEFT BASE FRAME(2)
with
HEX BOLT
(M8x1.25x40mm)(44), WASHER(M8)(57),
and
NYLOCK NUT(M8x1.25)(51).
Make sure you assembled
the shock allowing the shock to extend toward the
LEFT HANDLEBAR(8).
Connect the other end of the
SHOCK(14)
to the
TENSION ADJUSTER(12)
with
HEX BOLT (M8x1.25x40mm)(44), WASHER(M8)(57),
and
NYLOCK NUT(M8x1.25)(51).
Repeat the above to attach the
RIGHT HANDLEBAR(9)
and
SHOCK(14)
to the
RIGHT BASE FRAME(3).
Summary of Contents for Orbital Rower 1215
Page 16: ...PRODUCT PARTS DRAWING 16 FRONT BACK ...
Page 20: ...NOTES 20 ...
Page 21: ...NOTES 21 ...
