ASSEMBLY INSTRUCTIONS
10
STEP 7
Slide the
SEAT(25)
onto the
CENTER BEAM(1).
Insert the
STOPPER BOLT(20)
through the
CENTER
BEAM(1)
and lock in position by screwing on the
STOPPER(19).
Also, please verify that the other
STOPPER
BOLT(20)
and
STOPPER(19)
are assembled at the factory. Press the
CENTER BEAM CAP(28)
into the
back end of the
CENTER BEAM(1).
STEP 8
Pry the
METER(30)
from the
CONSOLE(31).
Attach the
CONSOLE(31)
to the
CENTER BEAM(1)
with
ROUND HEAD SCREWS(M4x10mm)(48).
STEP 9
Install a AA battery into the
METER(30),
one battery included. See page 12 for detailed battery installation
instructions. Run the connection wire of the
METER(30)
through the square hole on the
CONSOLE(31).
Place the
METER(30)
back into the
CONSOLE(31).
Plug the connection wire of the
METER(30)
into the
socket located at the front end of the
CENTER BEAM(1).
(Assembled at the factory)
Summary of Contents for Orbital Rower 1215
Page 16: ...PRODUCT PARTS DRAWING 16 FRONT BACK ...
Page 20: ...NOTES 20 ...
Page 21: ...NOTES 21 ...
