SET UP INSTRUCTIONS
9
Place the
INTONE Folding Recumbent Bike
in the area where it will be used. It is recommended that the
INTONE Folding Recumbent Bike
be placed on an equipment mat. The maximum operation dimensions
of the
INTONE Folding Recumbent Bike
are approximately 42 1/4" long x 25 3/8" wide x 44 1/4" tall.
(These dimensions may vary up to one inch.) An area 4 feet wide x 6 feet long is required for safe operation
of the
INTONE Folding Recumbent Bike.
Make sure that adequate space is available for access to and
passage around the
INTONE Folding Recumbent Bike.
Adjust the
LEVELING CAPS(50)
on the
REAR STABILIZER(3)
so that the
INTONE Folding
Recumbent Bike
sits on the floor without rocking.
The
INTONE Folding Recumbent Bike
has a pair of
MOVING WHEELS(48)
on the
FRONT
STABILIZER(4).
Fold the
INTONE Folding Recumbent Bike.
Grasp the
HANDRAIL(7)
and
tip the
INTONE Folding Recumbent Bike
forward to move.
LEVELING:
Equipment Mat
(not included)
FUNCTION INSPECTION:
Visually inspect the
INTONE Folding Recumbent Bike
to verify that assembly is as shown in the above
illustration. Check the function of the
INTONE Folding Recumbent Bike.
Turn the crank slowly through
one complete revolution to verify that the drive train functions properly. Adjust the
TENSION KNOB(29)
and
verify that it functions properly.
Locate and read the
WARNING LABEL(77)
on the
INTONE Folding Recumbent Bike.
Make
sure that all users read the
WARNING LABEL(77).
CAUTION:
MOVING:
