background image

SAFETY INSTRUCTIONS

2

WARNING:

1.
2.

3.
4.

5.
6.

7.
8.
9.

10.
11.
12.
13.
14.

15.
16.
17.

18.

Read the Warning Label posted on the Front Base Frame.
The 

Core Training Inversion System

 should only be used after a thorough review of the Owner's

Manual.
We recommend that two people be available for assembly of this product.
Do not use the 

Core Training Inversion System

 alone.  Always have a helper available in case

assistance is needed in recovering from the decline position.
Always use the Seat Belt.  Make sure the Seat Belt is securely fastened before inverting.
You must understand how to recover from the inverted position before using the 

Core Training

Inversion System.

  Read the 

LEVER OPERATION

 section on page 15 BEFORE using the 

Core

Training Inversion System.

Do not allow children to use or play on the 

Core Training Inversion System.

Keep small children and pets away from the 

Core Training Inversion System

 at all times.

The 

Core Training Inversion System

 should not be used by persons weighing more than 300 lbs.

The 

Core Training Inversion System

 should not be used by persons over 6 feet 6 inches tall.

Keep hands and feet away from moving parts.
It is recommended that you place this exercise equipment on an equipment mat.
Use the 

Core Training Inversion System

 only on a level surface.

Wear appropriate clothing when exercising; do not wear loose clothing that could become caught in
the

 Core Training Inversion System.

Be sure that there is enough room for the seat to rotate completely.
Use the 

Core Training Inversion System

 only as described in the manual.

The safety level of the 

Core Training Inversion System

 can be maintained only if it is examined

regularly for damage and wear.
This equipment is for home use only. It is not for commercial use.

Maintenance Instructions

16

Warranty

17

Product Parts Drawing

18

Parts List

19

Notes

21

Fax/Mail Ordering Form

22

Safety Instructions

 2

Before You Begin

 4

Hardware Identification Chart

 5

Assembly Instructions

 6

Operational Instructions

13

Storage

16

TABLE OF CONTENTS

          Page

    Page

Extreme obesity
Glaucoma, retinal detachment or conjunctivitis
Pregnancy
Spinal injury, Cerebral Sclerosis, or acutely swollen joints
Middle ear infection
High blood pressure, Hypertension, Recent stroke or Transient ischemic attack
Heart or circulatory disorders for which you are being treated
Hiatus hernia or Ventral hernia
Bone weaknesses including Osteoporosis, Unhealed fractures, Medullary pins, or
Surgically implanted orthopedic supports.
Use of anti-coagulants including Aspirin in high doses.

WARNING:

  Before using this equipment you should consult with your personal physician to see if

inversion equipment is appropriate for you.  

Do not use this equipment without your physician's

approval.

  Do not use this equipment if you have any of the following conditions or ailments:

To reduce the risk of serious injury, read the following safety instructions before
using the 

Core Training Inversion System

.

Summary of Contents for CoreTraining Inversion System























Reviews: