Stamina CoreTraining Inversion System, Owner'S Manual

Page: 14 / 22

OPERATIONAL INSTRUCTIONS
FOAM PAD USE AND ADJUSTMENT
Place your feet under the
FOAM PADS(30)
with your legs
between the
FOAM PADS(30)
and the
LEG SUPPORT
CUSHIONS(28).
Loosen the
SPRING KNOB(29).
Pull the
SPRING KNOB(29)
and slide the
FOAM PAD SUPPORT(15)
toward you until your
legs are properly held between the
FOAM PADS(30)
and
LEG
SUPPORT CUSHIONS(28).
To release your feet or relax the grip, loosen and pull the
SPRING
KNOB(29),
then slide the
FOAM PAD SUPPORT(13)
forward.
1.
2.
3.
14
THE SEAT BELT
CAUTION:
THE HANDRAILS
Always use the seat belt. Make sure the seat belt is
securely fastened before inverting.
Sit on the
SEAT CUSHION(25).
Place both ends of the
SEAT
BELT(26)
on top of your upper legs and insert the end of the belt
through the metal rings as shown in the illustration. Fold the end of
the belt over and secure it in place with the hook and loop material.
WARNING:
The
Core Training Inversion System
features a set of Handrails
for added convenience and safety. The Handrails are connected to
the Inversion Chair with linkages so that pulling on the Handrails
will move the Inversion Chair away from the inverted position toward
the upright position.
The
HANDRAILS(19)
are to help you invert and help you return
from inversion to the upright position. Pull the
LEVER(36),
grasp
the right
HANDRAILS(19),
and pull yourself to the upright position.
Make sure that the Handrails are functioning properly
before using The
Core Training Inversion System.