Stamina CoreTraining Inversion System, Owner'S Manual

Page: 10 / 22

ASSEMBLY INSTRUCTIONS
10
STEP 12:
Refer to the Bottom View in the illustration. Attach the
BELT GUIDES(27)
onto the
SEAT
CUSHION(25)
with
BUTTON HEAD BOLTS(M8 x 15mm)(58)
and
WASHERS(M8)(67).
Make the
Securing Pad face down and insert the
SEAT BELT(26)
through the
BELT GUIDES(27)
under the
SEAT
CUSHION(25).
Move the
SEAT CUSHION(25)
to the center of the
SEAT BELT(26).
Attach the
SEAT
CUSHION(25)
onto the
SEAT FRAME(12)
with
BUTTON HEAD BOLTS(M8 x 15mm)(58)
and
WASHERS(M8)(67).
Securing Pad
must face down
BOTTOM VIEW
STEP 13:
Rotate the
SPRING KNOB(29)
on the
SEAT FRAME(12)
counter clockwise until the knob
portion can be pulled. Pull down the
SPRING KNOB(29)
then insert the
LEG SUPPORT FRAME(13)
into the
SEAT FRAME(12).
Release the
SPRING KNOB(29)
to lock the
LEG SUPPORT FRAME(13)
in one of the adjustment holes. Rotate the
SPRING KNOB(29)
clockwise to lock the
LEG SUPPORT
FRAME(13)
securely.
STEP 14:
Rotate the
SPRING KNOB(29)
on the
LEG SUPPORT FRAME(13)
counter clockwise until
the knob portion can be pulled. Pull the
SPRING KNOB(29)
then slide the
FOAM SUPPORT(15)
completely into the
LEG SUPPORT FRAME(13).
Put a
WASHER(M6)(66)
onto the
BUTTON HEAD
BOLT(M6 x 47mm)(56)
and insert the bolt halfway through the square tube on the
LEG SUPPORT
FRAME(13),
slide the bolt through the loop on the end of the
SPRING(32),
slide the bolt through the
square tube and secure with
NYLOCK NUT(M6)(63)
and
WASHERS(M6)(66).
Press the
SQUARE
PLUG(49)
into the
LEG SUPPORT FRAME(13).
Slide the
FOAM PADS(30)
onto both sides of the
FOAM SUPPORT(15).