ASSEMBLY INSTRUCTIONS
7
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com to the Services section and order the part needed, e-mail
us at [email protected], or call us toll free at 1-800-375-7520 (in the U.S.). Our
Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday
through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Key Rib
STEP 1
Lay the Main Frame Assembly on the floor as shown in the illustration. Now refer to the inset drawing. Make
sure the Key Rib in the
STABILIZER CAP(5)
aligns with the slot in the
REAR SUPPORT(4),
then press
the
STABILIZER CAP(5)
onto the
REAR SUPPORT(4).
STEP 2
Connect the
EXTENSION WIRE(39)
to the
SENSOR WIRE(40).
Then insert the
FRONT SUPPORT(26)
into the
SLEEVE(25)
which in inside of the
CENTER BEAM(1)
and secure with the
SUPPORT PLATE(23),
BUTTON HEAD BOLTS(M8x1.25x25mm)(53), LOCK WASHERS(M8)(61),
and
WASHERS(M8)(59).
STEP 3
Turn the Main Frame Assembly to the normal upright position.
Attach the
SEAT STOPPERS(3)
to both
sides of the
CENTER BEAM(1)
with
BUTTON HEAD BOLTS(M8x1.25x25mm)(53).
Summary of Contents for AVARI Free Motion Rower
Page 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK...
Page 21: ...NOTES 21...
