OPERATIONAL INSTRUCTIONS
10
HEAD REST ADJUSTMENT
The
HEAD REST(15)
on the
CARRIAGE(7)
can be
positioned at an incline by simply pivoting the
SUPPORT
BRACKET
underneath the
HEAD REST(15).
ROPE LENGTH ADJUSTMENT
The
ROPES(18)
feed through the
PULLEY SETS(22)
then
thread through the loops on the underside of both outer
edges of the
CARRIAGE(7).
PLASTIC SNAP HOOKS(19)
on the end of each rope are used to adjust the
ROPE(18)
length. If more length is needed, as when performing some
leg exercises, then attach the
PLASTIC SNAP HOOKS(19)
to loop
D.
To shorten, as when performing some arm
exercises, then bring the
ROPES(18)
around the last loop
D
and secure to loops
A, B,
or
C
with the
PLASTIC SNAP
HOOKS(19).
Wrap the
ROPES(18)
around and through
the loops again and attach where needed to shorten
ROPES(18)
even more.
A
LOAD ADJUSTMENT
There are two
TENSION CORDS(10)
and one heavier
RED
POWER CORD(11).
The resistance of the
CARRIAGE(7)
can be adjusted by
securing the
TENSION CORDS(10)
and the
RED POWER
CORD(11)
in the slots located on the
FRONT FRAME(1).
You
can achieve various levels of resistance by securing different
combinations of the
TENSION CORDS(10)
and
RED POWER
CORD(11)
in the slots.
NOTE:
To achieve greater resistance in the
RED POWER
CORD(11)
and
TENSION CORDS(10),
stretch and
re-tie the tension cords in a more taut position.
B
C
D
SUPPORT
BRACKET
SLOTS
Summary of Contents for 55-4272
Page 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK...
Page 22: ...NOTES 22...
