Stamina 55-4272, Owner'S Manual, Page: 7 / 23

ASSEMBLY INSTRUCTIONS
7
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Service section and order the part needed,
e-mail us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the
U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Remove your AeroPilates® Performer 272 from its packaging, placing the product on its side with
the
LOCKING PIN(28)
side upward. Remove the
LOCKING PIN(28)
and unfold the
MAIN FRAME
ASSEMBLY separating the half that has the attached LOCKING PIN(28). When completed, the frame
should form a "V" with the frame ends separated approximately three feet.
STEP 2
Attach the four RUBBER FEET(31) to the FRONT FRAME(1) and REAR FRAME(2) with ROUND HEAD
SCREWS(M5x0.8x35mm)(38). The ROUND HEAD SCREWS(M5X0.8X35mm)(38) are already in the
RUBBER FEET(31). Attach the PLASTIC WHEELS(27) to the FRONT FRAME(1) with WASHERS(M8)
(47) and NYLOCK NUTS(M8)(42).
STEP 3
Unfold your AeroPilates® Performer 272 to a flat position by moving the FRONT FRAME(1) away
from the platform end of the
REAR FRAME(2)
in a clockwise position until fully extended. Lower the
AeroPilates® Performer 272 so all four RUBBER FEET(31) are flat on the floor.