ASSEMBLY INSTRUCTIONS
8
STEP 4
Remove the paper covering from the foam tape inside the
FRONT COVER(3)
and
REAR COVER(4).
Place the
FRONT COVER(3)
over the
FRONT FRAME(1).
Place the
REAR COVER(4)
over the
REAR
FRAME(2).
Press the covers securely in place.
STEP 5
Insert the
PULLEY RISERS(25)
into the mounting holes in the
REAR COVER(4)
and
REAR FRAME(2).
Insert
the
PULLEY RISERS(25)
all the way to the bottom, align the threaded holes in the
PULLEY RISERS(25)
with the holes in the
REAR FRAME(2),
and lock the
PULLEY RISERS(25)
in position with the
LOCKING
KNOBS(26).
STEP 6
Refer to the detail drawing below showing an enlarged view of the left
PULLEY RISER(25)
and the
LEFT
PULLEY HOOK(23).
With the pulley facing down, insert the
LEFT PULLEY HOOK(23)
into the left
PULLEY
RISER(25)
from the inside as shown. Swing the pulley forward as shown and the
LEFT PULLEY HOOK(23)
will be in position for use. Use the same procedure to install the
RIGHT PULLEY HOOK(24)
on the right
PULLEY RISER(25).
Summary of Contents for 55-4272
Page 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK...
Page 22: ...NOTES 22...
