LEVELING:
Adjust the location of
InMotion® Compact Strider Pro
to ensure
InMotion® Compact
Strider Pro
sits on the floor without rocking.
MOVING:
Grasp the handle on the top of the product and the
HANDLEBAR POST(59)
to move the
InMotion® Compact Strider Pro.
Do not use the
PEDAL ARMS(51, 40)
to move the
InMotion® Compact Strider Pro.
The
PEDAL ARMS(51, 40)
will move and may pinch
your hand or fingers.
FUNCTION INSPECTION:
Visually inspect the
InMotion® Compact Strider Pro
to verify that assembly is as shown in the above
illustration. Check the function of the
InMotion® Compact Strider Pro.
Stand on the foot pedals. Slowly
move your highest foot forward and follow the natural path of the machine. Turn the crank slowly through
one complete revolution to verify that the drive train functions properly. Adjust the
TENSION KNOB(13)
and verify that it functions properly and verify that the resistance changes.
CAUTION:
Locate and read the
WARNING LABEL(70)
on the
InMotion® Compact Strider Pro.
Make
sure that all users read the
WARNING LABEL(70).
SET UP INSTRUCTIONS
10
Equipment Mat
Place the
InMotion® Compact Strider Pro
in the area where it will be used. It is recommended that the
InMotion® Compact Strider Pro
be placed on an equipment mat. The maximum operation dimensions of
the
InMotion® Compact Strider Pro
are approximately 25.5 inches long x 16.7 inches wide x 47.6 inches
tall. (These dimensions may vary up to one inch.) Make sure that adequate space is available for access
to, passage around and emergency dismount from the
InMotion® Compact Strider Pro.
A minimum of
20 inches on at least one side and 20 inches either behind or in front of the
InMotion® Compact Strider
Pro
is required for safe operation.
