1. Adjust the
TENSION KNOB(13)
and verify that it functions properly and the resistance changes.
2. Verify that the
WARNING LABEL(70)
is in place and easy to read. Call Stamina Products immediately
at
1-800-375-7520
for a replacement
WARNING LABEL(70)
if it is missing or damaged.
3. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
4. Worn or damaged components must be replaced immediately or the
InMotion® Compact Strider
Pro
removed from service until repair is made.
5. Only Stamina Products supplied components should be used to maintain/repair the
InMotion®
Compact Strider Pro.
6. Keep your
InMotion® Compact Strider Pro
clean by wiping it off with an absorbent cloth after use.
STORAGE
1. To store the
InMotion® Compact Strider Pro
simply keep it in a clean dry place.
2. The minimum rest dimensions of the
InMotion® Compact Strider Pro
are approximately 25.5 inches
long x 16.7 inches wide x 43.7 inches tall. These dimensions may vary. Please measure your
InMotion®
Compact Strider Pro
if exact dimensions are needed.
3. Grasp the handle on the top of the product and the
HANDLEBAR POST(59)
to move the
InMotion®
Compact Strider Pro.
Do not use the
PEDAL ARMS(51, 40)
to move the
InMotion® Compact Strider
Pro.
The
PEDAL ARMS (51, 40)
will move and may pinch your hand or fingers.
4. To avoid damage to the electronics, remove the batteries from the
METER(24)
before storing the
InMotion® Compact Strider Pro
for one year or more.
The safety and integrity designed into the
InMotion® Compact Strider Pro
can only be maintained
when the
InMotion® Compact Strider Pro
is regularly examined for damage and wear. Special
attention should be given to the following:
MAINTENANCE
NOTE:
A standard crank extractor tool is required to remove the
CRANKS(7)
from the
AXLE(75).
14