ASSEMBLY INSTRUCTIONS
9
STEP 7
Attach the
TENSION POSTS(8)
to the back of the
TOP BEAM(5)
with
BUTTON HEAD BOLTS
(M10x1.5x50mm)(61), LOCK WASHERS(M10)(71)
and
WASHERS(M10)(70).
STEP 8
Slide the
LEFT
and
RIGHT FORCE ARMS(9, 10)
onto the shafts on
UPRIGHT(4)
and secure with
WASHERS(M10)(70)
and
NYLOCK NUTS(M10x1.5)(68).
Do not over tighten the nuts, as the
LEFT
and
RIGHT FORCE ARMS(9, 10)
must be able to pivot smoothly.
STEP 9
Hook three
TENSION CORDS(31)
to the three hooks at the top of the
TENSION POSTS(8)
on both
sides. Hook the lower ends of the
TENSION CORDS(31)
to the hooks on outer ends of the
LEFT
and
RIGHT FORCE ARMS(9, 10)
on both sides.
