The safety and integrity designed into the
BioFLEX 1700
can only be maintained when the
BioFLEX
1700
is regularly examined for damage and wear. Special attention should be given to the following:
1. Verify that the
WARNING LABEL(72)
and
LAT BAR WARNING LABEL(73)
are in place and
easy to read. Call Stamina Products immediately at
1-800-375-7520
for a replacement
WARNING
LABEL(72)
if it is missing or damaged.
2. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
3. Worn or damaged components shall be replaced immediately or the
BioFLEX 1700
removed from
service until repair is made.
4. Verify that the Cables are properly installed on all Pulleys.
5. Check the condition of the Cables. Replace the Cables if the plastic coatings are cracked or broken.
6. Check the Tension Cords for wear. Replace Tension Cords that are frayed or worn.
7. Check the plastic hooks on the both ends of all Tension Cords. Replace Tension Cords with deformed
or damaged hooks.
8. Check the pulleys for excessive wear. Replace worn pulleys.
9. Only Stamina Products supplied components shall be used to maintain/repair the
BioFLEX 1700.
10. Keep your
BioFLEX 1700
clean by wiping it off with an absorbent cloth after use.
STORAGE
MAINTENANCE
23
1. To store the
BioFLEX 1700,
simply keep it in a clean dry place.
2. To move the
BioFLEX 1700,
hold the upright of the
BioFLEX 1700
while you tip it backward. When
the
WHEELS(32)
come in contact with the floor you can easily roll the
BioFLEX 1700.
