ASSEMBLY INSTRUCTIONS
12
Lug
STEP 13
Hook the
SEAT FRAME(11)
onto one of the Lugs on the
FRONT SUPPORT(6)
and secure with the
LOCKING KNOB(16)
and
WASHER(M10)(70).
NOTE:
The three Lugs on the
FRONT SUPPORT(6)
allow the
SEAT FRAME(11)
to be attached in three
different positions. Start with one of the center positions and adjust if necessary. Use the upper
position if users are taller than average. Use the lower position if users are shorter than average.
STEP 14
Attach the
MOUNTING PLATES(17)
to the
SEAT FRAME(11)
with
FLAT HEAD BOLTS(M8x1.25x50mm)
(54), WASHERS(M8)(69),
and
NYLOCK NUT(M8x1.25)(67).
Attach the
SEAT(18)
to the
MOUNTING
PLATES(17)
with
FLAT HEAD BOLTS(M6x1x15mm)(52).
HINT
:
Before tightening the
FLAT HEAD BOLTS(M8x1.25x50mm)(54)
and securing the
MOUNTING
PLATES(17)
to the
SEAT FRAME(11),
attach the
SEAT(18)
to the
MOUNTING PLATES(17)
with
FLAT HEAD BOLTS(M6x1x15mm)(52)
to make sure the plates are in the correct position.
Then remove the
SEAT(18)
and securely tighten the
FLAT HEAD BOLTS(M8x1.25x50mm)(54).
STEP 15
Attach the
MOUNTING PLATE(17)
to the
FRONT SUPPORT(6)
with
FLAT HEAD BOLT(M8x1.25x20mm)
(53).
Attach the
BACK CUSHION(19)
to the
MOUNTING PLATE(17)
and the mounting plate on the
HANDRAIL(20)
with
FLAT HEAD BOLTS(M6x1x15mm)(52).