Stamina 1400 AIR ROWER, Owner'S Manual

Page: 7 / 18

ASSEMBLY INSTRUCTIONS
7
STEP 3
Slide the
SEAT(54)
onto the
RAIL(1).
Attach the
REAR STAND(2)
onto the
RAIL(1)
with
HEX HEAD
BOLTS(M8 x 15mm)(70).
NOTE:
STEP 4
Remove the
LOCKING KNOB(44)
from the
SUPPORT FRAME(4).
Remove the
PULL PIN(43)
from
the
RAIL(1).
Unfold the
FAN ASSEMBLY
by swinging the
SUPPORT FRAME(4)
toward the front.
Refer to the inset drawing. If it is difficult to slide the
SEAT(54)
onto the
RAIL(1),
turn the
NYLOCK NUT(M6)(75)
located on the
SEAT CARRIAGE(55)
counter-clockwise to adjust
the position of the Roller lower.
If the
SEAT(54)
rocks on the
RAIL(1),
turn the
NYLOCK NUT(M6)(75)
located on the
SEAT
CARRIAGE(55)
clockwise to tighten the Roller.
1.
2.
Roller
Fan Assembly