Stairmaster FREECLIMBER 4200 PT Owner'S Manual Download Page 70

Page: 70 / 99

Page 61

SPRING PULLEY

Remove the bottom cover.

Unhook the pedal arm return spring from the spring hanger.

Remove the snap ring from the pulley shaft (see Figure 11).

Slide the pulley and washer off the shaft.

Before reinstalling the pulley, clean the pulley shaft thoroughly with
a clean, dry cloth. Apply a thin coat of multi-purpose grease to the
pulley shaft.

Slide the pulley and washer onto the shaft. Install the snap ring.

Route the spring under the spring pulley.

Hook the end of the spring over the spring hanger. Do not twist the
spring.

Reinstall the covers.

DRIVE CHAIN

Remove the bottom cover.

PARTS REMOVAL AND REPLACEMENT

TO REDUCE THE RISK OF EYE INJURY, WEAR EYE

PROTECTION WHEN REMOVING SNAP RINGS.

WARNING

DO NOT TWIST THE SPRING DURING INSTALLATION. IT WILL WEAR

EXCESSIVELY AND REDUCE THE LIFE OF THE SPRING.

Summary of Contents for FREECLIMBER 4200 PT




































































































Search results

Summary of Contents for FREECLIMBER 4200 PT

Reviews:

Related manuals for FREECLIMBER 4200 PT

Brands by name

Popular brands

Stairmaster FREECLIMBER 4200 PT, Owner'S Manual

Search results

Summary of Contents for FREECLIMBER 4200 PT

Reviews:

Related manuals for FREECLIMBER 4200 PT

Brands by name

Popular brands