Stairmaster FREECLIMBER 4200 PT Owner'S Manual Download | Manualshive

Page: 4 / 99

background image

Page v

PREFACE

Regular use of the StairMaster

®

FreeClimber

®

exercise system is a safe and

effective way to develop aerobic fitness while conditioning the major muscles
of the lower body. To get the best results, and to keep your machine in peak
operating condition, you should carefully read and follow the guidelines
presented in this manual.

WHAT IS IN THIS MANUAL?

The first part of this manual includes sections on safety, installation, operating
instructions, and preventive maintenance. The second part contains detailed
information on problem troubleshooting and repair procedures. An Appendix at
the end of the manual provides additional information for the owner.

Throughout this manual, console keypad keystrokes are enclosed in [ ].

The names of the keys and special console operational modes are shown in
capital letters. For example, your machine is ready to use when the console
displays "SELECT WORKOUT." Press [MANUAL] to start the MANUAL exercise
program.

WHAT IS THE STAIRMASTER FREECLIMBER EXERCISE SYSTEM?

The StairMaster FreeClimber exercise systems are vertical climbing machines
with an independent step action. The independent step action, combined with
the patented pedal geometry featured on all StairMaster steppers, provides an
aerobic workout equivalent to uphill running or climbing stairs, but without the
high-impact pounding to the joints and muscles.

There are five FreeClimber models: the 4600 PT (Personal Trainer),

the 4600 CL (Cordless), the 4400 PT, the 4400 CL, and the 4200 PT. All
FreeClimbers feature the Quiet Drive transmission. The 4600 PT and the
4600 CL have an adjustable tilting, full-featured Liquid Crystal Display (LCD)
console. The 4400 PT and the 4400 CL have an upright, rail-less design. The
4600 PT and the 4400 PT use an external power supply that is plugged into an
AC wall outlet. The 4600 CL and the 4400 CL use power generated during a
workout to run the electronics. The 4600 PT and 4600 CL have contact heart
rate and telemetry (Polar

®

) heart rate monitoring. The 4400 PT and the 4400 CL

feature telemetry heart rate monitoring. The 4200 PT uses an external power
supply and the console has less feedback and fewer workout programs than
the 4600 PT/CL and the 4400 PT/CL.

«
...
2
3
4
5
6
...
»

Summary of Contents for FREECLIMBER 4200 PT




































































































Reviews:

No comments

Related manuals for FREECLIMBER 4200 PT

Giraffe OmniBed

Brand: Ohmeda Pages: 54

Brand: IBS Scherer Pages: 64

Brand: Xtool Pages: 51

Brand: H-TEC Education Pages: 16

Brand: H-TEC Education Pages: 12

Brand: Rane Pages: 38

Brand: Kartsana Pages: 36

Brand: RAPID REBOOT Pages: 18

Brand: MacDon Pages: 170

Brand: MacDon Pages: 108

Brand: MacDon Pages: 108

Brand: MacDon Pages: 51

Brand: MacDon Pages: 104

Brand: MacDon Pages: 240

QUANTOFIX Relax

Brand: Macherey-Nagel Pages: 192

Brand: MacDon Pages: 182

Brand: MacDon Pages: 192

Brand: MacDon Pages: 53

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands