7.
Hover the console (Fig. 8) over the neck mast and connect the cable
coming out of the mast into the cable protruding from the console.
Fig. 7
8.
Mount the console (Fig. 9) to the frame using the four pre-installed
Phillips head screws thru each of the available holes on the neck
plate.
Fig. 8
9.
Mount the left & right grip arms (Fig. 10) onto the corresponding pivot
shafts located on the base of the machine while mating the end of the
grip arms to each of the crank linkages and keeping the arms
together by loosely inserting a socket head cap screw with washer to
each joint.
Hardware
QTY
M8 x 20mm Socket Head Cap Screw
M8 x 25mm O.D. Flat Washer
2
2
Fig. 9
Owner’s Manual
15
Summary of Contents for Air Fit
Page 1: ...Air Fit 620 8245 Owner s Manual Owner s Manual 1...
Page 29: ...Owner s Manual 29...
Page 30: ...Owner s Manual 30...
Page 31: ...Owner s Manual 31...
