Stairmaster Air Fit, Owner'S Manual

Page: 14 / 32

4. Hover the console mast (Fig. 5) over the base joints and mate the
wires coming out of each component.
Fig. 4
5. Slide the console mast (Fig. 6) over the neck joints of the base
and align the three securing bolt holes.
WARNING
To prevent any damage, verify the cable harness is not kinked
and out of the way of the brackets when mating the console
mast to the base of the machine.
Fig. 5
6. Install three bolts with washers (Fig. 7) thru each neck joint hole and
torque all bolts to their final value. Repeat this for the opposite side.
Hardware QTY
M8 x 15mm Button Head Bolt
M8 x 16mm O.D. Flat Washer 6
6
Final Torque:
18-19 Lb-Ft (24-26 Nm)
Fig. 6
Owner’s Manual
14