BAST_
02.FM
15
5 Operating chain hoist
5.2 Operating from control pendant
Safety note
If the rocker switch is no longer depressed by the operator, it returns to the 0 posi-
tion, the hoist motion is automatically stopped (dead man’s control).
If the hoist malfunctions, e.g. the actual motion does not correspond to the motion
intended in activating the rocker switch, release the rocker switch immediately. If the
motion continues, press the emergency stop button.
5.3 Emergency stop
Every hoist must have a means of disconnecting the power supply to all drives under
load from the ground.
After an emergency stop, the operator must not restart the hoist /crane system until a
qualified person has determined that the fault which led to this function being activa-
ted has been eliminated and no danger can arise from the continued operation of the
system.
• The emergency stop button is on the control pendant.
• Press emergency stop, the system comes to a halt.
• To release the emergency stop: turn the button in the direction shown.
2-step
1st step: slow
2nd step: fast
1st step: slow
2nd step: fast
1st step: slow
Long travel: right/left
Cross travel: right/left
Lifting/lowering::
2nd step: fast
Emergency stop
09.07
