Mounting and Installation
14
127303 / 8003607300
2016-05-23·BA00·III·en·05
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Panel mounting devices
Series 8003/1
Closing the connection chamber
Opening the connection chamber
11616T00
11617T00
• Push the connection cover
onto the terminal support (1)
until it snaps into place.
• Push the cable toward the
connection chamber cover (2).
• Tighten the gland nut to a
torque of approx. 1.3 Nm.
The connection chamber is
now tightly sealed.
11618T00
11615T00
• Open the connection chamber
only if you have a suitable tool,
for example a slotted
screwdriver 0.6 x 3.5.
• Loosen the cable entry.
• Position the screwdriver
against one of the lugs and turn
it by 90° (1).
• Slightly pull back the
connection chamber cover
and hold it in this position.
• Position the screwdriver
against the second lug and
turn it by 90°.
• Remove the connection
chamber cover.
The connection chamber
is open (2).
