127303 / 8003607300
2016-05-23·BA00·III·en·05
Safety Notes
5
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Panel mounting devices
Series 8003/1
2.3
Symbols on the Device
3
Safety Notes
3.1
Operating Instructions Storage
• Read the operating instructions carefully.
• Store the operating instructions at the mounting location of the device.
• Observe applicable documents and operating instructions of the devices to be
connected.
3.2
Safe Use
Before mounting
• Read and observe the safety notes in these operating instructions!
• Ensure that the contents of these operating instructions have been fully understood by
the personnel in charge.
• Use the device in accordance with its intended and approved purpose only.
• Always consult with R. STAHL Schaltgeräte GmbH if using the device under operating
conditions which are not covered by the technical data.
• We cannot be held liable for damage caused by incorrect or unauthorized use of the
device, or for non-compliance with these operating instructions.
For assembly and installation
• Observe national assembly and installation regulations (e.g. IEC/EN 60079-14).
• Observe national safety and accident prevention regulations.
• During installation and operation, observe the information (characteristic values and
rated operating conditions) on the type plates and data plates and information signs
located on the device.
• Before installation, make sure that the device is not damaged.
• When using type 8003/1.1 and type 8003/1.3, protect the back of the device against
mechanical damage.
Symbol
Meaning
05594E00
CE marking according to the current applicable directive.
16338E00
ATEX notified body for quality control.
02198E00
According to marking, device certified for hazardous areas.
15649E00
Input
15648E00
Output
