Parameterization and Commissioning
24
169128 / 944160310050
2020-08-25·BA00·III·en·08
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Ethernet CPU module and
power module for Zone 1/Class I, Div.1
Series 9441, Series 9444, Series 9492
Setting the port for acyclic HART communication
Changes to the port settings can have an effect on the functionality of the socket!
Changes to the port settings must only be made by trained, authorised service staff!
Before changing the port settings, ensure that the required port is not already in use by
other applications in the system.
The port settings must correspond to the settings in the DTM.
The ports can be set from 0 to 65535.
LCD display
Settings
Press the [Enter] key twice to switch from the system level to the
information/service level.
12309E00
Press the [Enter] key once if the display shows
"CPU 0-0: primary; 9441/12-00-00" in order to switch from the
system level to the information/service level.
The following display appears (shown on the left).
12310E00
Press the ◄ or ► key until the following display appears
(shown on the left).
12311E00
Press the [Enter] key.
The following display appears (shown on the left).
12478E00
Press the ◄ or ► key until the following display appears
(shown on the left).
12479E00
Press the [Enter] key.
The following display appears (shown on the left).
Press the ◄ or ► key until the required value is set.
Press and hold the button to change the value quickly
(continuously).
12313E00
Press the [Enter] key.
The following display appears (shown on the left).
Press the [Enter] key to confirm the change to the port or
press the [ESC] key to cancel the change to the port.
The display switches back to the main menu in the information/
service level.
CPU 0-0: Status
NoDataExch
CPU 0-0:Address
<
>
IpAdr
192. 23.121.7
<
>
Pt HART
50001
<
>
Pt HART
change
50001
accept changes ?
< >
no
yes
Summary of Contents for is1+ 9441 Series
Page 85: ......
