Parameterization and Commissioning
20
169128 / 944160310050
2020-08-25·BA00·III·en·08
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Ethernet CPU module and
power module for Zone 1/Class I, Div.1
Series 9441, Series 9444, Series 9492
Information/service level
In the information/service level, detailed information about the modules can be displayed
and the communication addresses of the CPU module and power module can be changed
(see "Display module-dependent information").
Expert level
6.1.2 Change or activate the Communication Addresses of the CPU Module and Power Module
Changes in the expert level have an effect on the functionality of the CPU module and
power module!
Changes in the expert level must only be made by trained, authorised service staff!
Switching to the expert level is password-protected.
Changes to the IP address, the Subnet mask or the default gateway can lead to
communication loss via Ethernet!
Changes to the communication addresses have an immediate effect on the system
behaviour and can lead to an error in the system!
Changes to the communication addresses must only be made by trained,
authorised service staff!
Changed communication addresses are active immediately after the change has been
made.
They are saved permanently and are available after a reset or recommissioning.
The sub-menu for the address settings can only be called up if the Ethernet CPU module
is not in data exchange status.
If the Ethernet CPU module switches to data exchange status while the sub-menu is
open, it is ended.
The following display appears:
12328E00
Changing the address can be cancelled at any time by pressing the [ESC] button.
The following display appears:
12308E00
Pressing the [Enter] key switches the display back to the main menu in the
information/service level.
CPU 0-0:
< exit submenu >
discard changes?
< >
no
yes
Summary of Contents for is1+ 9441 Series
Page 85: ......
