Mounting and installation
26
266665 / 640960300140
2018-11-09·BA00·III·en·00
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency Luminaire with LED
Series EXLUX 6409/4
Connection of remote switch to control gear
Connecting the remote switch to the potential-free contact "Remote switch" of the
control gear.
8.3.3 Cable entries
The standard luminaire is delivered with 3 lead-in holes, 2 cable glands and
2 stopping plug.
Tightening torques for components from R. STAHL Schaltgeräte GmbH
Luminaires with installed cable entries and stopping plugs from
R. STAHL Schaltgeräte GmbH must be tightened using the following values:
Luminaires with approved cable entries and stopping plugs; not supplied by
R. STAHL Schaltgeräte GmbH
19192E00
Clamping range:
1.5 mm
2
solid, finely and extra finely
stranded
Stripping length:
8.5 to 9.5 mm
Tightening torque
Connection thread
Pressure screw
Cable entry
8161
M20 x 1.5
2.3 Nm
1.5 Nm
M25 x 1.5
3.0 Nm
2.0 Nm
Stopping plugs
8290
M20 x 1.5
1.0 Nm
–
M25 x 1.5
1.5 Nm
–
DANGER
Explosion hazard due to impermissible cable entries and stopping plugs!!
Non-compliance results in severe or fatal injuries.
• Only use separately certified cable glands and stopping plugs that have
been tested and certified according to Directive 2014/34/EU (ATEX) and
IECEx (CoC).