207321 / 941160310190
2018-04-16·BA00·III·en·04
Maintenance, Overhaul, Repair
29
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Zone 2 Ex i Field Device Coupler 8 Spurs
Series 9411/24
During maintenance of the device, check at least:
• the tight fit of the clamping screws holding the cables,
• the device enclosure and / or protective enclosure for cracks or other visible signs of
damage,
• the tightness of the cable glands.
• the gasket between enclosure and cover.
• the enclosure for moisture.
• whether the permissible ambient temperatures are observed,
• whether the device is used according to its designated use.
11.2 Overhaul
11.3 Repair
11.4 Returning the Device
• Only return or package the devices after consulting R. STAHL!
Contact the responsible representative from R. STAHL.
R. STAHL's customer service is available to handle returns if repair or service is required.
• Contact customer service personally.
or
• Go to the www.r-stahl.com website.
• Under "Support" > "RMA form", select "Request RMA slip".
• Fill out the form and send it.
Confirmation will be sent. R. STAHL's customer service will contact you.
You will receive an RMA slip after speaking with customer service.
• Send the device along with the RMA slip in the packaging to
R. STAHL Schaltgeräte GmbH (refer to Section 1.1 for the address).
Observe the relevant national regulations in the country of use.
DANGER
Explosion hazard due to improper repair!
Non-compliance results in severe or fatal injuries.
• Repair work on the devices must be performed only by
R. STAHL Schaltgeräte GmbH.
Summary of Contents for 9411/24 Series
Page 2: ......
