147924 / 8537608300
2014-01-13·BA00·III·en·04
Installation
31
Safety switch
8146/5-V37 8150/5-V37
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Main contacts and auxiliary contacts (directly on the switch)
Mounting the coverings
IP20 covering:
Snap the IP20 coverings (1) into the contact. Insert the designation plate (4) in the groove
of the IP20 coverings (2).
Ex i covering:
Snap the Ex i covering (3) into the contact. Snap the Ex i cover (2) into the Ex i covering
(3). Insert the designation plate (4) in the groove of the Ex i coverings (2).
15088E00
8146/5-V37-.02-....
8146/5-V37-.03-....
8146/5-V37-.04-....
8150/5-V37-.02-....
8150/5-V37-.03-....
8150/5-V37-.04-....
Connection
cross-section
1.5 ... 6.0 mm
2
One or two conductors can be installed under a single connection
terminal. In case of solid conductors, both conductors must have the
same cross-section and must be made of the same material.
1 conductor must be bent in form of a hook. The conductors can be
connected without previous measures.
Tightening
torque
2 Nm
