4
⚠
Warning
Recycling/disposal of device and battery:
This device
includes a lithium-ion battery. In compliance with your
local laws and regulations, please contact local
authorities for end of life disposal of this product and
battery.
See Important Product Information insert provided with
product for important safety and product information.
Device Description
Dash Schematic
①
/
On/Off - Start/Stop Button
: Press to power
device on, then press to start/stop an
activity. To power the device off, hold
button for 3s.
②
Lap:
Select to mark a new lap, return to
previous page within the menu
③
Up:
Scrolls to previous menu item or page
④
Enter:
Selects item in menu or activity page
⑤
Down:
Scrolls to next menu item or page
⑥
Mount Locations (x2):
Two rear mounting
locations allow for use in portrait or
landscape mode
⑦
USB Dust Cover:
When installed properly,
protects the Micro-USB Plug from the
elements
⑧
Micro-USB port:
For device charging and
data transfer
Charging Dash
To charge your Dash, lightly lift the rubber dust cover
①
to allow access to the Micro-USB port
②
, insert the
Micro-USB
plug
③
, and insert USB plug into certified
USB 2.0 5V wall-mounted charger or USB 2.0 port on
your computer
.
④
Installing the Mount
①
Thumb Tab
②
Main Arm
③
2.5mm Hex Key (not provided)
④
M2.5 Cap Head Screws (x2)
⑤
Handlebar Clamp Ring
1.
Position handlebar clamp ring
⑤
to the right of the
stem and between any cables and the 31.8mm
handlebar
2.
Insert the two M2.5 screws
into the holes of the
④
clamp ring
⑤
and use a 2.5mm hex key
③
to
loosely tighten ring on handlebars
3.
Adjust mount to preferred angle
4.
Tighten screws
to
2 Nm
.
④
⚠
WARNING:
DO NOT OVERTIGHTEN SCREWS.
