Chapter 4. Operation
14
Stack DVR2 Users Guide
To start recording close the Record Switch. Once recording,
the Recording Lamp will illuminate and the Status Lamp will
flash green for 3 seconds with a mark space ratio showing the
capacity remaining:
•
With an empty Compact Flash card the Status Lamp will
flash for approximately 2.7 seconds on : 0.3 seconds off.
•
With approximately 50% capacity remaining it will flash
1.5 seconds on : 1.5 seconds off.
•
With approximately 10% remaining the Status Lamp will
flash for 0.3 seconds on : 2.7 seconds off.
To stop recording, open (switch off) the Record Switch. The
Status Lamp will revert to showing static green and the
Recording Lamp will be extinguished.
!
Do NOT remove the CF card whilst recording is in progress.
The Compact Flash card may now be removed and placed
into a PC with a suitable Compact Flash card slot card slot.
The table below shows the function of the DVR2’s front
panel Status Lamp. Green generally indicates the unit is
functioning correctly and red indicates a fault or reset
condition.
Summary of Contents for DVR2-130
Page 1: ...Part No ST542103 004 DVR2 130 DVR2 240 DVR2 440 DVR2 540 Users Guide ...
Page 2: ......
Page 6: ......
