Chapter 6. Configuration
28
Stack DVR2 Users Guide
To enable a camera check the box on the right of the
configuration screen i.e.
Camera 1, Camera 2
, etc. If the
Capture Mode
is set to
Auto
, then the software will
immediately start to capture the image on the enabled
camera(s).
Once the camera images have been captured you may then
modify the configuration.
Use the selection rectangles on the right of the screen to crop
the camera image. Click and drag any node on the rectangle
to resize the crop area. Click and drag within the rectangle to
select a different part of the camera image. Controls for
Border
,
Mirror
and
Flip
are also located on the right of the
configuration screen.
Full Screen Crop Window
You may enlarge the input camera window for more precise
positioning by clicking the appropriate Camera 1, Camera 2,
etc buttons on the bottom left of the screen. The right side of
the configuration screen shows an enlarged video picture.
Select “Composite” to display the recorded output image.
You can now click and drag any of the individual windows in
the composite screen, to reposition them.
Summary of Contents for DVR2-130
Page 1: ...Part No ST542103 004 DVR2 130 DVR2 240 DVR2 440 DVR2 540 Users Guide ...
Page 2: ......
Page 6: ......
