Chapter 6. Configuration
Stack DVR2 Users Guide
21
Chapter 6. Configuration
The DVR2 may be configured from a PC when connected via
a USB lead.
!
Once you have finished configuring the DVR2, exit the DVR
Configuration Utility to update the DVR2 and return it to
normal operation. Alternatively, you can upload the new
configuration by clicking the “Write Config” button. In both
cases you MUST remove the USB cable for the DVR2 to
accept the changes.
PC Connection
Install the DVR Configuration Utility which can be found on
the CD-ROM supplied with the DVR2 system.
Once installed, connect the USB cable to a USB port on the
PC.
Run the DVR Configuration Utility on the PC.
System Connection Screen
Summary of Contents for DVR2-130
Page 1: ...Part No ST542103 004 DVR2 130 DVR2 240 DVR2 440 DVR2 540 Users Guide ...
Page 2: ......
Page 6: ......
