Energy management
The power consumption of this radio set is very small. If no signal is
received, the electronic battery stand-by mode is activated. If the
capacity of the battery cells is low or if the batteries are almost empty,
the radio set will emit an audio warning that is repeated every 10 sec.
Now you have to charge the battery cells or replace the batteries.
Battery status indicator
Full capacity
Half of capacity
Low capacity: The audio warning for weak batteries sounds
every 10 sec. You have to charge the battery cells now.
No capacity: The battery symbol flashes, a double warning
tone sounds and the radio set is switched off.
Functions
Note: If a setting is not activated within 10 seconds the radio set
will automatically adopt the last setting.
Switching on/off the radio set
Turn the knob clockwise for switching the radio set on and counterclo-
ckwise for switching it off. Switching on is accompanied by a beep
sound.
Adjusting the volume
Use the knob to adjust the volume (volume up: by turning clockwise,
volume down: by turning counterclockwise).
Selecting the channel
First select one of the eight available channels.
Note:
Always adjust both radio sets to the same channel!
Press the MENU key once: The channel number flashes.
Use the UP/DOWN keys to select a free channel.
Confirm by pressing the
PTT
key.
27
Summary of Contents for freecomm 700
Page 37: ...Notizen Notes 37...
Page 38: ...Notizen Notes 38...
