Incoming call signaling
Three different incoming call signaling types are available.
Call tone
Call tone plus vibration
Vibration
Selecting the incoming call signaling
Press the MENU key 9 x:
1
and start flashing.
Use the UP/DOWN keys to select the requested incoming call signaling.
Press the
PTT
key: The symbol of the selected incoming call signaling
is displayed.
Roger beep
When releasing the
PTT
key after transmission, a signal tone is auto-
matically transmitted. This tone signals to your contact partner that
your message is finished and your partner can talk (this is useful for
instance for disturbed radio communications).
Activating/deactivating the roger beep
Press the MENU key 10 x:
rO OFF
flashes.
Use the UP/DOWN keys to select
rO ON
.
Confirm by pressing the
PTT
key.
For deactivating press the MENU key again 10 x:
rO ON
flashes.
Use the UP/DOWN keys to select
rO OFF
.
Confirm by pressing the
PTT
key.
Activating/deactivating the key beep
Press the MENU key 11 x:
tO OFF
flashes.
Use the UP/DOWN keys to select
tO ON
.
Confirm by pressing the
PTT
key.
For deactivating press the MENU key again 11 x:
tO ON
flashes.
Use the UP/DOWN keys to select
tO OFF
.
Confirm by pressing the
PTT
key.
Dual watch function
If you wish to be ready-to-receive on both channels instead of only
one channel, you require the dual watch function. With this function
31
Summary of Contents for freecomm 700
Page 37: ...Notizen Notes 37...
Page 38: ...Notizen Notes 38...
