manualshive.com logo in svg

STA-RITE IntelliPro Variable Speed, Installation And User Manual

Share
Download
STA-RITE IntelliPro Variable Speed Installation And User Manual Download Page 25

Programming for Constant Run

When programming a schedule for a speed, the speed can not be programmed with the same start and 
stop times.  However, it will run without stopping if it is programmed with the start time set one minute 
after the stop time. Example: A single speed will run non stop if programmed with a Start Time of 8:00 
AM and a Stop time of 7:59 AM.

External Control

This function is for programming speeds that will run when the IntelliComm power center controller 
sends it a command.  For example, Terminal 3 and 4 in IntelliComm will correspond to External Control 
Program #1.   (5 and 6 to Ext. Ctrl. #2). Use the External Control feature to program the IntelliComm 
power center.

To access the Ext. Ctrl. menu:

1.  Check that the green power LED is on.

2. Press the 

Menu

 button. “Settings” is displayed.

3. Use the 

Up

 or 

Down

 arrow button to scroll to “Ext. Ctrl.”.

5. Press the 

Select

 button. “Program 1” is displayed.  

6. Press the 

Select

 button. “1100 RPM’ is displayed.  

7. Press the 

Select

 button. The “RPM” number will highlight.  

8. Press 

Up

 or 

Down

 arrow button to change the RPM setting.

9. Press the 

Enter

 button to save the setting. Note: To cancel any changes, press the 

Escape

 

button to exit without saving.

10. Press the 

Escape

 button.

11. Use the 

Up

 or 

Down

 arrow button to scroll to “Program 2”.

12. Repeat Step 5 through 9 to set Program 2, 3, and 4. Twelve (12) Programmable Speeds.

Features: Quick Clean

This feature can be used to ramp the pump up to a higher RPM for vacuuming, cleaning, adding 
chemicals, after a storm for extra skimming capability.  Press the Quick Clean button (LED on) and 
then the Start/Stop button (LED on) to start the pump at preset RPM and duration of time. Regular 
schedules will resume once the Quick Clean cycle is fi nished and will run in the 
“Running Schedule” mode.

IntelliPro

® 

Variable Speed Pump Installation and User’s Guide

15 

Summary of Contents for IntelliPro Variable Speed





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands