manualshive.com logo in svg

STA-RITE IntelliPro Variable Speed, Installation And User Manual

Share
Download
STA-RITE IntelliPro Variable Speed Installation And User Manual Download Page 2

© 2011 Pentair Water Pool and Spa, Inc. All rights reserved.

 

This document is subject to change without notice.

1620 Hawkins Ave., Sanford, NC 27330 • (919) 566-8000
10951 West Los Angeles Ave., Moorpark, CA 93021 • (805) 553-5000

Trademarks and disclaimers: 

IntelliComm

®

, 

EasyTouch

®

, 

IntelliTouch

®

, 

SunTouch

®

,

 IntelliPro

®

, 

Eco Select

™

, 

Pentair 

Water Pool and Spa

®

 and Sta-Rite

® 

are registered tradmarks and/or trademarks of Pentair Water Pool and Spa, Inc. 

and/or its affi liated companies in the United States and/or other countries. Tefl on

®

 is a registered trademark of E.I. Du 

Pont De Nemours and Company Corporation and Plasto-Joint Stik

®

 is a registered trademark of La-Co Industries, Inc. 

Unless noted, names and brands of others that may be used in this document are not used to indicate an affi liation or 
endorsement between the proprietors of these names and brands and Pentair Water Pool and Spa, Inc. Those names 
and brands may be the trademarks or registered trademarks of those parties or others.

P/N 354831   Rev A   6/15/11

IntelliPro

®

 

Variable 

 

Speed Pump
(P/N P6E6VS4H-209L)

Customer Service / Technical Support

If you have questions about ordering Pentair Water Pool and Spa (“Pentair”) replacement parts,
and pool products, please use the following contact information:

Customer Service

 (8 A.M. to 5 P.M. — Eastern and Pacifi c Times)

Phone: (800) 831-7133

Fax: (800) 284-4151

Technical Support

Sanford, North Carolina

 (8 A.M. to 5 P.M. ET)

Phone: (919) 566-8000

Fax: (919) 566-8920

Moorpark, California

 (8 A.M. to 5 P.M. PT)

Phone: (805) 553-5000 (Ext. 5591)

Fax: (805) 553-5515

Web site

visit www.pentairpool.com or www.staritepool.com to fi nd information about Pentair products.

Summary of Contents for IntelliPro Variable Speed





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands