STA-RITE IntelliPro Variable Speed Installation And User Manual Download Page 21 | Manualshive

Page: 21 / 52

background image

Settings: Language

To access the language menu:

1. Check that the green power LED is on.
2. Press the

Menu

button. “Settings” is displayed.

3. Press the

Select

button. “Pump Address” is displayed.

4. Use the

Up

or

Down

arrow button to scroll to “Language”.

5. Press the

Select

button to access the language menu.

6. Press

Select

to highlight current Language in use.

7. Press the

Enter

button to select the desired language for the control panel. To cancel any

changes, press the

Escape

button to exit edit mode without saving.

8. Press the

Escape

button to exit.

Settings: Set Minimum Speed (RPM)

The minimum pump speed can be set from 450 RPM to 1700 RPM. The default setting is 450 RPM.
To access the Set Minimum Speed menu:

1. Check that the green power LED is on.
2. Press the

Menu

button. “Settings” is displayed.

3. Press the

Select

button. “Pump Address” is displayed.

4. Use the

Up

or

Down

arrow button to scroll to “Set Min Speed”.

5. Press the

Select

button to change the setting. The cursor will appear in the fi rst number

column (ones)

6. Press

Up

or

Down

arrow button to change the pump’s minimum speed setting from 450 to

1700 RPM.

7. Press the

Enter

button to save the setting. To cancel any changes, press the

Escape

button to

exit edit mode without saving.

8. Press the

Escape

button to exit.

Settings: Set Maximum Speed (RPM)

The maximum speed can be set from 1900 RPM to 3450 RPM. The default setting is 3450. This setting
is used to set the maximum running speed of the pump. When the pump is set to Priming “Enabled” the
pump will ramp up to and run at the Maximum Speed setting to attain the prime. A Service Professional
must set the Maximum Speed of the pump to not exceed the maximum fl ow rate of the system on which
it will operate.

CAUTION: The Maximum Flow rate setting should be set so the system never

operates at or above a 0.635 meters vacuum.

To access the Set Maximum Speed menu:

1. Check that the green power LED is on.
2. Press the

Menu

button. “Settings” is displayed.

3. Press the

Select

button. “Pump Address” is displayed.

4. Use the

Up

or

Down

arrow button to scroll to “Set Max Speed”.

5. Press the

Select

button to change the setting. The cursor will appear in the fi rst number

column (ones)

6. Press

Up

or

Down

arrow button to change the pump’s maximum speed setting from 1900 to

3450 RPM.

7. Press the

Enter

button to save the setting. Press the

Escape

button to exit. To cancel any

changes, press the

Escape

button to exit edit mode without saving.

IntelliPro

®

Variable Speed Pump Installation and User’s Guide

11

«
...
19
20
21
22
23
...
»

Summary of Contents for IntelliPro Variable Speed





















































Reviews:

No comments

Related manuals for IntelliPro Variable Speed

Brand: Raypak Pages: 40

Brand: SAER Elettropompe Pages: 76

Brand: ubbink Pages: 29

Brand: YANGTECH Pages: 23

Brand: Calpeda Pages: 27

Brand: Watts Pages: 12

Elmo Rietschle C-VLR 62

Brand: Gardner Denver Pages: 32

Brand: Daalderop Pages: 16

Brand: IMO Pages: 24

Brand: salmson Pages: 20

SCP 16000 IQ Level Sensor

Brand: Kärcher Pages: 76

Brand: EBARA Pages: 172

WEATHERMAKER 50TFQ008

Brand: Carrier Pages: 28

Brand: Daikin Pages: 12

Brand: Rheem Pages: 16

Brand: Laars Pages: 32

Wilden Advanced P400

Brand: Dover Pages: 56

RoadLazer Husky 515

Brand: Graco Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands