UM0522
Motor control operations
29/39
Note:
If an error occurs, make sure that the inDART-STX board is connected to the PC. A green
LED lights up if the board is connected.
7.
Click on the file pull-down menu, select "load", then "code buffer".
8.
In the "load file to code buffer" dialog box format menu, select "Motorola S-Rec"
settings.
9.
Click the button near "name" box and select the binary code (.S19) to download into the
microcontroller, and press "OK" (to know which binary code to select, see
Compiling the firmware on page 26
).
8.13 Setup
option
byte
10. Press the "option byte" button in the toolbar and select the value as shown in the
"option configuration" window (see
), and press "OK".
Figure 17.
Option byte settings
11. Press the "auto" button in the toolbar and select the programming options as shown in
.
www.BDTIC.com/ST
