Motor control operations
UM0522
20/39
8.3 Software
requirements
To customize, compile, and download the motor control firmware, the following software
must be installed:
●
"STEVAL-IHM017V1 - GUI" (included in the CD-ROM)
●
STVD7 for inDART-STX V.3.11 (also called "ST7 Toolset" downloadable from Softec's
website: www.softecmicro.com)
●
Cosmic compiler - ST7 C compiler 16 Kbyte free version - 4.5c (downloadable from
Cosmic's website: www.cosmic-software.com).
8.3.1 Installing
the
software
STEVAL-IHM017V1 - GUI installation
Insert the CD-ROM provided with the kit and execute Setup.exe.
3
rd
party software installation
Follow the instructions of the related software to install and configure STVD7 for
inDARTSTX and cosmic compiler.
Installation note
1.
Install the Cosmic compiler first. Use the default installation folder: "C:\Program
Files\COSMIC\CXST7_16Kbite". Registration is required before using the product. You
can perform this procedure at any time by running the "lmreg16k.exe" file inside
Cosmic's installation folder. Complete the form and click on the "Register by email"
button. You will receive a license file "license.lic" that must be copied inside the
installation folder under the "license" folder.
2.
Then install STVD7 for inDART-STX. During the first run of the software after
installation, a prompt for the configuration of the toolset should appear. The toolset can
be configured at any time by opening "tools options" inside STVD7. To do this, click
"toolset", and select the "toolset" menu tab, select "ST7Cosmic" and configure as in
.
Figure 11.
STVD7 for InDART-STX toolset configuration
www.BDTIC.com/ST
