Element-P
39
Figure 24
Daily Maintenance – Element-P
CAUTION: THE
DOOR
AND
FRONT
PART
OF
THE
STOVE
WILL
BE
HOT.
DO
NOT
TOUCH ANY PART OF THE STOVE THAT IS HOT! CAUTION: NEVER
ADD FIRE STARTER TO A HOT STOVE.
1. Check Grate Weldment and Shaker Plate (See figure 25) to determine if holes are
plugged. Clean as needed. With proper precautions the grate may be partially cleaned
while the stove is hot. Follow these steps:
a. Wear a leather glove that covers the lower arm.
b. Turn the Stove to Heat Level 1 and allow the flame to burn down to a low burn.
c. Open the firebox door slowly to prevent drawing ash or odors into the room.
d. Use the “scraper” provided to move the burning pellets to one side of the grate, leaving
the ash in the bottom of the grate. (See Figure 25)
e. Rake the ash & clinkers out over the grate into the ash pan.
f. Rake the burning pellets across the bottom of the grate.
g. Close the door and re-select the desired heat setting.
Summary of Contents for Element-P
