Eclipse Manual
29
Revolution Multi-Fuel Pot – Exploded View
(Certain parts that obstruct the view of these components have been removed for a clearer picture)
Figure 21
The main components of the Revolution Pot are:
a.
The Pot Weldment
b.
The Revolving Drum, which is the bottom of the burnpot.
c.
The Clinker Cutters
To remove the components shown in figure 21:
1.
First remove the pot as shown in figure 20.
2.
Disengage the Drive Coupler by sliding it away from the Drum.
3.
Lift the drum out of the stove.
4.
Remove the 2 ¼-20 nuts that hold the Clinker Cutter in place.
5.
Lift the Clinker Cutter out of the slots that position it in the stove.
To re-assemble the Pot Assembly reverse the steps above.
(Be sure to place the drum with
the drive coupling facing the Revolution gear motor.)
