Eclipse Manual
26
Figure 17
Figure 17 shows the location of the SmartScan components. Opening the right side door
will give you access to the Infra Red Sensor and the viewing lens on that side of the stove.
With the stove plugged in you know the unit is functioning when you see the small Yellow
LED is on. This means the light beam is projected across the stove to the left side where the
Reflector is located and reflected back to the sensor without any obstruction in between.
Occasional cleaning of the lens will be needed. The lens easily slides out of the bracket for
cleaning. The sensor may also be cleaned, by gently wiping the lens of the sensor with a
soft cloth.
Never clean the sensor using alcohol. Do not move the Sensor, this may knock
the Sensor out of alignment.
Opening the left side door will give you access to the Reflector and the viewing lens on that
side of the stove. Occasional cleaning of the lens will be needed. The lens easily slides out
of the bracket for cleaning. The Reflector may also be cleaned, by gently wiping the
reflector with a soft cloth.
