Eclipse Manual
28
To clean the holes in the burnpot use a 3/16” diameter rod or a long Phillips Screw Driver
(should be a minimum of 12” long) to reach the holes on the back side of the pot. Simply
insert the cleaning tool through one of the front holes and push it all the way through and
clean the hole that lines up behind it at the same time. (See Figure 19 on the previous
page.)
Revolution Multi-Fuel Pot - Removal
Figure 20
Figure 20 shows in more detail how the pot is removed from the stove for cleaning. The pot
should not need to be removed for cleaning if the method is used shown in figures 24 and
25 using a cleaning tool. Try cleaning the pot using both methods to become more familiar
with your stove. The Revolution pot design has been changed in this model to make it
easier to remove, without having the remove the Gearmotor and the Switch that control the
drum.
Figure 21 on the following page will show how the Clinker Cutter and the Drum are
removed from the stove. Unless the Drum has become jammed on a foreign object, these
components should not need to be removed from the unit.
